VDO Cyclecomputing MC1.0 User Manual

CYCLECOMPUTING
INSTRUCTION MANUAL
BEDIENUNGSANLEITUNG
MANUEL D´INSTALLATION ET D´UTILISATION
MANUALE D´INSTALLAZIONE E FUNZIONAMENTO
INSTALACION Y OPERACIÓN MANUAL
HANDLEIDING
MC1.0

VDO Cyclecomputing MC1.0 Specifications

General

Current Speed	Yes
Average Speed	Yes
Maximum Speed	Yes
Trip Distance	Yes
Total Distance	Yes
Ride Time	Yes
Clock	Yes
Display	LCD
Power Source	Battery
Water Resistance	Yes
Mounting	Handlebar

Summary

Preface

Important information about the altimeter

Provides essential details about the altimeter's function, calibration, and maintenance.

1. Mounting Guide

1.1 Sensor and Magnet Mounting

Instructions for attaching the speed sensor magnet to the spoke and sensor to the fork.

1.2 Handlebar Holder and Cable Routing

Details on routing the cable and attaching the handlebar holder securely.

2. Initial VDO MC 1.0 Setup

2.1 Operating Basics and Display Overview

Overview of the computer's basic operating instructions and display information.

2.3 Calling up Set-up Modes

2.3.1 Button / Key Functions in Set-up Mode

Explains the function of MODE 1 and MODE 2 keys during set-up operations.

2.5 Selecting the Wheel Circumference

2.5.1 How to Determine the Precise Wheelsize

Method for measuring and determining the exact wheel circumference for accurate readings.

2.7 The NAVIGATOR Function

2.7.1 Presetting the NAVIGATOR

Guide on how to preset or manually set the individual trip distance counter value.

6.1 Home Altitude Settings

6.1.1 Significance of Home Altitude

Explains the importance of setting a home altitude for accurate altimeter readings.

6.1.2 Setting Home Altitude

6.1.3 Altimeter Recalibration for Pressure Changes

Details on recalibrating the altimeter to compensate for barometric pressure changes.