VDO Cyclecomputing M3 WR - Settings: Unit Configuration (Time Format); Setting Clock Time Format

18
M3 WR
Settings – unit
The setting for the time format now appears on the display.
Here, you can select a 24-hour format or a 12-hour format
with AM/PM.
Press the BIKE button to make the selection.
Press the SET button to confirm the selection.
The response “Set OK” appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any further settings,
press and hold the SET button.
The settings menu closes.
The VDO M3 returns to function mode.