98 © Continental Automotive Issue 10/2019
2.4.10 Clock adjustment - RTC
In the setup menu, scroll to the RTC clock setting, press , then use the
and keys to select whether you want + or - and the amount of minutes you
want. Remembering that the maximum allowed is 5 minutes per week. After
selecting the desired time, press and the change will be performed.
In case of loss of external power, the clock will not be
shown on the screen, but the BVDR has an auxiliary
battery to ensure its time setting is maintained.
2.4.11 Time Zone Configuration - UTC
In the setup menu, scroll to "time zone setting" and press . Using the /
keys, select whether you want to increase (a) or decrease (b) a time zone, as
shown below. When the option is selected, press . If you need to print the
tape before adjusting, press , otherwise, to continue the change without
printing the tape, press . Then, to confirm the change, press . If you want
to cancel, press . The change is complete, when the "Configuration
(a) (b)
This setting has a limit of only one change in a 24-
hour period.
To Next Page
Loading...
