9
3. Functions of the Tachometer
Displays:
• Engine speed (indicated by means of a pointer)
• Engine hours (indicated in LCD)
• Engine oil pressure (indicated in LCD)
• Transmission oil pressure (indicated in LCD)
• Transmission oil temperature (indicated in LCD)
• Cooling water temperature (indicated in LCD)
• Engine oil temperature (indicated in LCD)
• Battery voltage (indicated in LCD)
• Instantaneous fuel consumption (indicated in LCD)
• % load (indicated in LCD)
• Intake air temperature (indicated in LCD)
• Charge air temperature (indicated in LCD)
• Exhaust gas temperature (indicated in LCD)
• Fuel level (indicated in LCD)
• Water level (indicated in LCD)
• Exhaust gas temperature before turbine (indicated in LCD)
• Vehicle speed (Easy Link satellite gauge)
Setting possibilities:
• Selection of illumination intensity in 8 steps
• Selection of display unit in metric or English units
• Selection of CAN baud rate
• Selection of sensor types for the analogue inputs
• Selection of the number of charge air pressure inputs
• Illumination - internal / external
• Selection of display modes
• Activation of the simulation mode
To Next Page
Loading...
