VECTECH 498A User Manual

VECTECH498A Operation Manual
Page
10
11. ReSet
Note: the function of the RESET is return to the initial value and clear up all the saved testing data and user
settings. Please select carefully.
1. Select “5. ReSet” under the MENU, and then LCD shows “Enter PWD” after pressing ENTER key.
2. input the password by pressing ▲ and ▼ keys, and then check the password by pressing ENTER key. ▲
means“1”, ▼means “0”, the password is “01101001”.
3. If the inputting password is error, the LCD shows “PWD Error” and returns to the menu “5. ReSet”.
4. If the inputting password is correct, the LCD shows “ReSet”,
 If select “YES”, the monitor shows “Master Reset” and runs the process of reset. The LCD shows “ReSet OK”
after successful resetting and return to the menu “5. ReSet”.
 If select “NO”, the monitor returns to the menu “5. ReSet”.
5. Press “BACK” key to the up menu.

VECTECH 498A Specifications

General

Brand	VECTECH
Model	498A
Category	Measuring Instruments
Language	English