Why won't my Vectronix PLRF10 Measuring Instruments turn on?
If your Vectronix Measuring Instruments aren't functioning, the batteries may be depleted. Try replacing them. Also, check the battery contacts for corrosion and clean them if necessary. Low temperatures can also reduce battery performance, so warm them up. Avoid storing batteries above +70°C, as extreme heat can shorten their life.
What to do if my Vectronix PLRF10 Measuring Instruments displays 'LobA'?
If your Vectronix Measuring Instruments displays 'LobA', it means the battery is almost used up. Replace the battery.
Why does my Vectronix PLRF10 Measuring Instruments display '– – – –' after distance measurement?
The '– – – –' display after a distance measurement indicates that the distance is outside the specified range. Respect the specified measurement range. It can also mean that the object is too small or inaccurately targeted, or that you are experiencing bad weather conditions. Respect the factors affecting measurement range.
What does 'ntOn' mean on my Vectronix PLRF10 Measuring Instruments?
The display of 'ntOn' after a measurement indicates that the device is being used in daylight conditions with 'ntOn' selected in the configuration menu. To resolve this, select 'ntOF' in the configuration menu.
How to fix Vectronix PLRF10 Measuring Instruments measuring wrong objects?
If your device is measuring objects in front or behind the intended object, it might be because '3dOF' is set in the configuration menu, which only displays the distance with the highest return signal. Select '3dOn' in the configuration menu.
How to make electronic reticle visible on Vectronix PLRF10?
If the electronic reticle is not visible, it is possible that 'ErOF' is set in the configuration menu. To make it visible, select 'ErOn' in the configuration menu.
General| Brand | Vectronix |
|---|---|
| Model | PLRF10 |
| Category | Measuring Instruments |
| Language | English |
Covers safety warnings, inappropriate use, and associated risks.
Instructions for cleaning the device's optical lenses.
Guidelines for cleaning the exterior of the rangefinder.
Details specifications related to the device's optical components.
Technical specifications for PLRF10 and PLRF15 models.
Provides data on power, temperature, weight, and dimensions.
Step-by-step guide for battery replacement.
Instructions on adjusting the diopter for clear image focus.
Explanation of glass and electronic reticle types.
Details on operating the device using its keys.
Illustrates factors influencing measurement accuracy and range.
Explains the procedure for measuring slope distance.
Describes obtaining distances for multiple objects in a single measurement.
Guide to navigating and changing instrument settings.
Details the "3dOn" function for multiple distance measurements.
Explains the "ErOn" function for the electronic aiming mark.
Describes the "ntOn" function for night vision compatibility.
Steps for attaching a night vision device.
Steps for removing the night vision device.
How to select and set measurement units (meters, yards, feet).
Instructions for setting a minimum distance limit.
Procedure for resetting the device to its factory default settings.
Guide on connecting the device to a computer via an interface cable.
Lists standard delivery components and spare parts.
Details optional accessories available for the device.
Information on Vectronix's quality management systems.
To Next Page
