Settings PLRF10/15-2.0en
23
Distance gate
In certain cases, it may be
useful to limit the closest
distance the device will
measure.
Click the distance key 3 times in
rapid succession.
"GAtE" appears briefly followed
by the current setting.
(e.g. "OFF")
Click the function key until the
desired minimum distance
appears (e.g. 300m)
Setting "OFF" disables the
distance gate.
Click the distance key three
times in rapid succession to
store the setting.The setting is
not changed when "OldC" is
displayed.
L
"GAtE" is displayed
briefly when closer
ranges are measured.
3x
OFF
200
300
400
500
. . .
3x
To Next Page
Loading...
