Troubleshooting PLRF10/15-2.0en
27
The electronic reticle is not
visible
"ErOF" is set in the
configuration menu
Select "ErOn" in the
configuration menu
(see page 18)
"LobA" is displayed
The battery is almost used up Replace battery (see page 11)
The device measures objects in
front or behind the intended
object
"3dOF" is set in the
configuration menu, only the
distance with the highest return
signal is displayed
Select "3dOn" in the
configuration menu (see page
18)
"ntOn" is displayed after a
measurement
The device is used during
daylight conditions with "ntOn"
selected in the configuration
menu
Select "ntOF" in the
configuration menu
(see page 18)
Problem Possible cause Solution
To Next Page
Loading...
