POS App Guide DIM Descriptions
13
Tokheim
MEMS IV,
MEMS V,
Vision 100/
200,
DHC with
all other
POS
330280-201 None 331390-XXX Y N N
Use 331354-001 for
67A/B or 98 instead.
This DIM is being
phased out. A Tokheim
Dedicated Hose Con-
troller (DHC) is
required, and should
have software version
5.6 dated 11/89 or
later.
CFN2 331001-003 None 331088-XXX Y N N
A Gasboy site control-
ler version 2.0 or later
is required. A Gasboy
junction box Gasboy
part # C05020 should
be ordered for installa-
tion. Single product
dispensers only. No
Blending
1
ANDI,
ALLIED
ANDI,
ALLIED
NEXTGEN
330280-001 Standard In Gauge None Y Y Y
Allied ANDI. Gilbarco
dispenser with T-14
(Australia). PEC with
8850. POSTEC with
RCC. Wayne with Mar-
keter 2000 (Sweden).
67/A - 98
331354-001 None
331391-XXX
Y N N
Tokheim controller
only.
67/B 848744-XXX
Columbus 330280-001 Standard in Gauge None Y Y Y
For Rockport cable kits
order Quantity (2)
320449-18 from
Tokheim. For Digi/Star-
gate order Quantity (2)
320449-9 Cable kits
from Tokheim.
Radiant 330280-001 Standard in Gauge None Y Y Y
Radiant Systems
Series P1550 set-up
on the TLS must have
a DIM string pro-
grammed in. The DIM
string is B9DNHG and
needs to be pro-
grammed in DIM Diag-
nostics. You will need
to use a twisted pair
RJ-11 cable to the port
on the POS with the
pin outs of 2,3,7.
Table 2.- Dispenser DIM and Installation Kits
Dispenser
Dispenser
Controller/
POS Type
TLS-350R
DIM P/N
w/Console
TLS-450
DIM P/N
w/Console
TLS-450PLUS
DIM P/N
w/Console
DIM Install Kit
P/N
Console
Compati-
bility
Notes
TLS-350R
TLS-450
TLS-450PLUS
To Next Page
Loading...
