Veeder-Root TLS-4 Series Console Hardware Replacement

6
Replacing the Printer Door Assembly (P/N 330020-626)
1. Switch Off power to the console.
2. Open the left front door of the console as shown in Figure 2.
3. Disconnect grounding braid from the saddle clamp on the inside of the Printer door (see Figure 4).
Figure 4. Printer door cables
Legend for numbered boxes in Figure 4
OFF
1
2
3
4
956-3 eps
5
1. Bottom Printer door hinge shoulder screw
2. USB cable
3. Power cable
4. Grounding braid
5. Top Printer door hinge shoulder screw

Veeder-Root TLS-4 Series Specifications

General

Brand	Veeder-Root
Model	TLS-4 Series
Category	Music Mixer
Language	English