Veeder-Root TLS-450 PLUS - TLS-450 PLUS Communication Ports; Selectable Comm Module Slots

Page 5
TLS-450PLUS Comm Ports - Menu>Setup>Communication
Figure 1 illustrates the console’s plug-in module
locations. Input/output cables to the console’s Comm
Modules attach to connectors on each module’s end
plate, and are accessible through an opening in the base
of the console.
Your console’s Comm Port conguration will depend on
features ordered. Slots 1-3 can be used for any combina-
tion of Comm Modules as per Table 1 on page 6.
Slots 4 and 5 are xed Ethernet and USB ports as shown
in the illustration of page 7.
Port 2
Front of console
Bottom of console
Port 1
Selectable Comm
Module slots
Fixed Comm
Module slots
123 45