6 Diagnostics
Tank
6-2
• 0.2 gph (0.76 lph) Auto-Confirm Report (0.2 gph auto-confirm data)
• 0.2 gph (0.76 lph) Tests Report (0.2 gph diagnostics test results)
• 0.1 gph (0.38 lph) Auto-Confirm Report (0.1 gph auto-confirm data)
• 0.1 gph (0.38 lph) Tests Report (0.1 gph diagnostics test results)
• Pressure Offset (pressure offset history interface for a pressure offset test)
Tank
Tank diagnostics contains information related to tank inventory volumes and tank charts.
AVAILABLE TANK DIAGNOSTIC REPORTS
•
30 Second Samples Report (30 second inventory samples)
• Tank Chart Report (tank chart report)
Meter
• Meter Events - The Meter Events screen lists up to one page of time-ordered meter start/stop events.
• Tank Map - This screen displays the meter-to-tank map. This is the screen you want to use to verify meter
mapping, or to view if the site should go unmapped, suspending BIR.
• Manual Mapping - The Manual Mapping diagnostic screen will help you assign meters to tanks with small
volume dispensing events and to identify post-blend metering. This screen displays active events as they are
reported by the POS terminal.
Reconciliation
• Status - This screen contains a list of causes for Reconciliation events.
• Reconciliation - This screen reports metered sales, variance and suggested reasons for the variance for the
selected product.
Probe
The Probe diagnostics contain information/diagnostics about probes. Section 8 of this manual is devoted to probe
troubleshooting.
AVAILABLE PROBE DIAGNOSTIC REPORTS
•
General Report (general information about each probe)
• Reference Distance Report (Original and Current Reference distances for each probe)
• Last sample Report (last sample information for each probe)
• Mag Options Report (options supported by mag probes)
• Communication Report (communication health and status parameters for each probe)
To Next Page
Loading...
