Vega VEGAFLEX 62 User Manual

6.6 Saving the parameter adjustment data
It is recommended noting the adjusted data, e.g. in this operating
instructions manual and archive them afterwards. They a re hence
available for multiple use or service purposes.
If VEGAFLEX 62 is equipped with an indicating and adjustment
module, the most important data can be read out of the sensor into
indicating and adjustment module. The procedure is described in the
operating instructions manual "Indicating and adjustment module" in
the menu item "Copy sensor data". The data remain there permanently
even if the sensor power supply fails.
If it is necessary to exchange the sensor, the indicating and adjustment
module is inserted into the replacement instrument and the data are
written into the sensor under the menu item "Copy sensor data".
40 VEGAFLEX 62 • 4 … 20 mA/HART two-wire
6 Set up with the indicating and adjustment module PLICSCOM
31837-EN-090831

Vega VEGAFLEX 62 Specifications

General

Accessory Type	Sensor
Application	Level measurement of liquids
Measuring principle	Guided wave radar
Measuring range	Up to 75 m (246 ft)
Process temperature	-40 to +200 °C
Process pressure	Up to 40 bar
Accuracy	±2 mm
Output signal	4 ... 20 mA/HART
Power supply	12 ... 36 V DC
Protection class	IP66
Material	Stainless steel 316L, Alloy C22
Connection	flange