Vega VEGAVIB 61 - Product description; 3.1 Configuration; 3.2 Principle of operation

7
3 Product description
VEGAVIB 61 • Two-wire 8/16 mA
29268-EN-170315
3 Product description
3.1 Conguration
The scope of delivery encompasses:
•
VEGAVIB 61 point level switch
•
Documentation
– This operating instructions manual
– Safety Manual "Functional safety (SIL)" (optional)
– Supplementary instructions manual "Plug connector for level
sensors" (optional)
– Ex-specic"Safety instructions" (with Ex versions)
– Ifnecessary,furthercerticates
The VEGAVIB 61 consists of the components:
•
Housing lid
•
Housing with electronics
•
Processttingwithvibratingrod
1
2
3
Fig. 1: VEGAVIB 61 with plastic housing
1 Housing lid
2 Housing with electronics
3 Processtting
Thetypelabelcontainsthemostimportantdataforidenticationand
use of the instrument:
•
Article number
•
Serial number
•
Technical data
•
Article numbers, documentation
•
SILidentication(withSILratingexworks)
With the serial number, you can access the delivery data of the instru-
ment via "www.vega.com", "VEGA Tools" and "Instrument search".
Youcanndtheserialnumberontheinsideoftheinstrumentaswell
as on the type label on the outside.
3.2 Principle of operation
VEGAVIB 61 is a point level sensor with vibrating rod for level detec-
tion.
It is designed for industrial use in all areas of process technology and
is preferably used for bulk solids.
Scope of delivery
Constituent par
ts
Type label
Application ar
ea