Velux KLR 100 Directions For Use

28 29
1
Menu
No. 1
Window
House
Locate
P1
P2
Start
--- PROGRAM P1 ---
Back
Program 1
Program 2
Program 3
Program 4
P1
P2
2
1
2
Menu
No. 1
Window
House
Locate
P1
P2
Stop
--- PROGRAM P1 ---
Back
Program 1
Program 2
Program 3
Program 4
P1
P2
▸
Activating and interrupting a Program P1/P2
Activating a program
You can activate eight programs at a time. You
can still use the various functions of the remote
control at the same time as one or more programs
are activated by pressing a program key.
Below four programs have been recorded under
program key P1.
The example shows how to activate Program 3
under program key P1.
Press
P1
"P1" three times to activate Program 3.
Program 3 is marked in the display and the pro-
gram automatically starts.
Note: Maximum time interval between each key
pressure: 2 seconds. Otherwise the program that
happens to be highlighted will automatically be
activated.
Interrupting a program
Icon
▸
indicates that a program has been acti-
vated. A program in progress can be interrupted
as follows:
Press
P1
or
P2
to find the program in progress.
The activated program has been ticked.
Press
to highlight the program in question.
Press
"Stop" to interrupt the program.

Velux KLR 100 Specifications

General

Product type	Remote Control
Frequency	868 MHz
Power source	Battery
Compatibility	VELUX INTEGRA products
Range	300m (open air)
Battery Type	2 x AA Alkaline
Operating Range	Up to 30m indoors