7
2.4 Parts Ordering Chart for Venmar 1.8 HE,
Venmar 2.6 HE, vänEE 2000 HE and vänEE 3000 HE
2.0
Service (cont’d)
No Description Venmar Venmar vänEE vänEE
1.8 HE 2.6 HE 2000 HE 3000 HE
1 Simple Collar 8” 01657 01657 01657 01657
2 Double Collar 6” 00865 00865 00865 00865
3 Filter 14.875” x 14.375” x 0.74” 04771 04771 04771 04771
4 Damper Actuator (6W) 01295 01295 01295 01295
5 Damper Actuator Rod 7.250” 10905 10905 10905 10905
6 Capacitor 02104 02104 02104 02104
7 Electronic Circuit Board 13038 13038 13038 13038
8 Door Switch (SPST), E69 10A 01825 01825 01825 01825
9 Single Collar Port #5 6.000” 01277 01277 01277 01277
10 Insulated Triangular Damper 12452 12452 12452 12452
11 Door Assembly 13433 13433 12661 12661
12 Door Latch 00886 00886 00886 00886
13 Door Keeper 00887 00887 00887 00887
14 Heat Recovery Core 04816 04816 04817 04817
15 Motor Panel 11236 11236 11236 11236
16 Motor Panel Insulation 01439 01439 01439 01439
17 Motor Service 12064 12065 12064 12065
18 Wheel 7.125” DIA. x 3” 01231 01231
18 Wheel 3.062” DIA. x 3” 01263 01263
19 Damper Assembly Bracket 11233 11233 11233 11233
20 Thermistor (not shown) 12895 12895 12895 12895
21 Drain Connector Kit (2) (not shown) 11937 11937 11937 11937
Please take note that parts not listed are not available; those parts require assembly knowledge that only manufacturer can guarantee.
TO ORDER PARTS: Contact your local distributor