To Next PageTo Next PageWhat to do if the air from my Venmar Air Conditioner is too cold?
If the air from the supply grille of your Venmar Air Conditioner is too cold: * Check whether the exterior hood is blocked. * Try operating the unit on a lower speed ventilation setting, or using intermittent or recirculation mode, if available. * Consider installing a duct heater.
How to fix dry inside air with Venmar 41552 Air Conditioner?
If the air inside is too dry while using your Venmar Air Conditioner: * Consider using a humidifier temporarily. * If your unit has the option, operate it in recirculation mode.
Why is the LED blinking red on my Venmar 41552 Air Conditioner?
A blinking red LED on the integrated control of your Venmar Air Conditioner indicates a problem. This could be due to: * The door being open while the unit is not unplugged. If this is the case, close the door and press the integrated control push button once to reset the unit. * A problem with the exhaust motor. In this case, contact your installer.
General| Brand | Venmar |
|---|---|
| Model | 41552 |
| Category | Air Conditioner |
| Language | English |
Details the unit's booting sequence and LED indicator status for operational feedback.
Steps for performing quarterly cleaning and filter maintenance on the unit.
Instructions for annual cleaning of the unit's core and internal components.
Steps to prepare the unit by removing transport brackets and setting dampers.
Guidance on choosing an appropriate location, including attic installation considerations.
Instructions for connecting the unit's drain tubing to a drain or pail.
Covers installation of ductwork for fully ducted, exhaust/supply, and simplified systems.
Guidelines for installing exterior hoods, including placement and height requirements.
Instructions for installing a dual exterior hood using the optional Tandem transition kit.
Procedures for connecting insulated flexible and non-insulated rigid ducts to the unit ports.
How to enable extended defrost mode for specific unit models in cold environments.
Compatibility chart and wiring instructions for connecting optional main and auxiliary wall controls.
