Venmar E15 ECM HRV User Manual

E15 ECM ERV*
E15 ECM HRV*
E15 HRV
E10 HRV
90H-V ECM ERV*
90H-V ECM HRV*
90H-V+
60H-V+
These products earned the ENERGY STAR
®
by
meeting strict energy efficiency guidelines set
by Natural Resources Canada and the US EPA.
They meet ENERGY STAR requirements only
when used in Canada.
21781 rev. 09
READ AND SAVE THESE INSTRUCTIONS
RESIDENTIAL USE ONLY
! !
VB0202
* THE FACTORY SET SPEED FOR THESE UNITS IS NOW FROM 55 CFM
TO 125 CFM (SEE PAGE 12 FOR MORE DETAILS).
USER AND INSTALLER MANUAL

Venmar E15 ECM HRV Specifications

General

Brand	Venmar
Model	E15 ECM HRV
Category	Air Conditioner
Language	English

Summary

1. Using This Unit

1.1 Integrated Control

Unit booting sequence and integrated control operation.

2. User Servicing Instructions

2.1 Quarterly Maintenance

Instructions for performing quarterly maintenance on the unit.

2.2 Annual Maintenance

Instructions for performing annual maintenance on the unit.

3. User's Troubleshooting

4. Warranty

5. Technical Data

5.1 Air Distribution

Explanation of air distribution in normal and defrost modes.

6. Installation

6.1 Door Configuration

Instructions on how to configure the unit's door for maintenance access.

6.2 Locating the Unit

Guidance on choosing an appropriate location for unit installation.

6.2.1 Attic Installation for E15 ECM ERV Only

Specific attic installation considerations for the E15 ECM ERV.

6.3 Installing the Ductwork and the Registers

Detailed steps for installing ductwork and registers.

6.3.1 Fully Ducted System

Instructions for fully ducted system installation.

6.3.2 Exhaust Ducted System - Supply Side

Instructions for exhaust ducted system, supply side connection.

6.3.3 Exhaust Ducted System - Return Side

Instructions for exhaust ducted system, return side connection.

6.3.4 Simplified Installation - Return/Supply

Instructions for simplified return/supply installation.

6.3.5 Simplified Installation - Return/Return

Instructions for simplified return/return installation.

6.4 Installing the Exterior Hoods

Guidance on installing exterior hoods for the unit.

6.5 Connecting the Ducts to the Unit

Steps for connecting flexible and rigid ducts to the unit.

6.5.1 Insulated Flexible Ducts

Detailed steps for connecting insulated flexible ducts.

6.5.2 Non-Insulated Rigid Ducts

Instructions for connecting non-insulated rigid ducts.

6.5.3 Non-Insulated Flexible Ducts

Instructions for connecting non-insulated flexible ducts.

6.6 Connecting the Drain

Instructions for connecting the unit's drain tubing.

7. Controls

7.1 Setting Extended Defrost for E15 HRV, E10 HRV and 60H-V+

How to set extended defrost for specific HRV models.

7.2 Speed and Defrost Setting for E15 ECM ERV, E15 ECM HRV, 90H-V ECM ERV and 90H-V ECM HRV

Setting speed and defrost for specific ECM ERV/HRV models.

7.3 Electrical Connection to Optional Wall Controls

Compatibility chart for connecting optional wall controls.

7.3.1 Altitude or Platinum

Wiring diagram for Altitude or Platinum wall controls.

7.3.2 Deco-Touch

Wiring diagram for Deco-Touch wall controls.

7.3.3 Lite-Touch Constructo or Lite-Touch Bronze

Wiring diagram for Lite-Touch wall controls.

7.3.4 Constructo or Bronze

Wiring diagram for Constructo or Bronze wall controls.

7.3.5 Optional Auxiliary Controls

Wiring for optional auxiliary controls like dehumidistat.

8. Connection to the Furnace

9. Balancing the Unit

Preparation

Steps to prepare for unit balancing.

Balancing Procedure

Step-by-step procedure for balancing the unit.

10. Service Parts

11. Wiring Diagrams

Wiring Diagrams for AVS E15 HRV and 90H-V+ Units

Electrical wiring diagrams specific to AVS E15 HRV and 90H-V+ models.

Wiring Diagrams for AVS E10 HRV and 60H-V+ Units

Electrical wiring diagrams specific to AVS E10 HRV and 60H-V+ models.

12. Troubleshooting

LED Signal Troubleshooting

Troubleshooting guide based on LED signals and error types.

Wall Control Not Working

Troubleshooting steps when the wall control is not functioning.

Unit Does Not Work

Troubleshooting flowchart for when the unit is not operating.

Unit Does Not Work - Motor Issues

Further troubleshooting for specific motor issues.

Supply Motor Does Not Work

Specific troubleshooting for supply motor failure.