22
1. Disconnect the power supply.
2. Clean filter
• Remove filter.
• Vacuum to remove most of the dust.
• Wash with a mixture of warm water
and mild soap. You may add bleach if
you wish to disinfect (one tablespoon
per gallon). Rinse thoroughly. Shake
filter to remove excess water and let dry.
NOTE: Washing the filter in the top tray of the dishwasher is possible, but the aluminum
frame might tarnish.
3. Plug back the unit.
4. Reset the maintenance indicator by inserting a small rod (e.g.: paper clip end) into
the optional control reset hole. Press lightly until the Maintenance indicator light turns
off.
5.1 BIANNUAL MAINTENANCE
5. MAINTENANCE
WARNING
Risk of electrical shocks. Before performing any maintenance or servicing,
always disconnect the unit from its power source. It is recommended to
wear safety glasses and gloves when performing maintenance or servicing.
To Next Page
Loading...
