7
3. INSTALL THE UNIT
Choose an appropriate location for the unit, far from the areas of the house where peace
and quiet are desired.
• So as to provide easy access for filter maintenance (sometimes, by
installing the unit upside down, it becomes easier to get to the filter).
• Close to an exterior wall, so as to limit the length of the insulated flexible
ducts to and from the unit.
• Away from hot chimneys and other fire hazards.
• Allow for a power source (standard 3-prong grounding outlet).
3.1 LOCATING AND MOUNTING THE UNIT
• Phillips or Robertson no. 2 screwdriver
• Scissors or utility knife (to cut duct tape and flexible ducts)
• Duct tape
• Jig saw
• A pair of metal shears (if the exterior covering of the house is aluminum or
vinyl)
• A chisel and hammer (if the exterior covering of the house is brick)
• Caulking gun and caulking
3.2 TOOLS AND MATERIALS
Use the 4 chains and springs in the hardware pack provided with the unit. According to
your needs, the unit can be installed upside down.
3.3 HOW TO HANG THE UNIT
To Next Page
Loading...
Need help?
General
