Venstar T1070 - Advanced Setup: Unoccupied Period Settings; Dry Contact Unoccupied Operation Mode; Unoccupied Cooling Setpoint Adjustment; Unoccupied Heating Setpoint Adjustment

Advanced Setup
Select Dry Contact
Unoccupied operation:
Unoccupied Setpoints
Off
Press
MODE
Page 14
Off = when the Dry Contact is closed,
the thermostat will be forced into the
Off mode.
Unoccupied = when the
Dry Contact is closed,
the thermostat will con-
trol to the Unoccupied setpoints.
Setup
85
I3
55
unoccupied
Adjust the cooling
setpoint for unocc-
upied periods.
(35 - 99, OF )
unoccupied
Press
MODE
After programming is complete, press the
MODE and FAN buttons at the same time
to leave the Setup screens. If no buttons
are pressed, the display will leave the
setup screens after sixty seconds.
unoccupied
Adjust the heating set-
point for Unoccupied
periods.
(OF, 35 - 99 )