Need help?Do you have a question about the Venstar T2000 and is the answer not in the manual?
General| Brand | Venstar |
|---|---|
| Model | T2000 |
| Category | Thermostat |
| Language | English |
Equipment tested for residential interference, potential causes and solutions.
Information on RF exposure limits and Industry Canada compliance for device operation.
Step-by-step guide to safely remove and prepare for new thermostat installation.
Chart mapping old thermostat terminals to new thermostat connectors for proper wiring.
Diagram and list of terminal designations on the thermostat backplate for wiring.
Guide to setting dip switches on the thermostat for system compatibility and operation.
Wiring diagram and dip switch settings for a 1-stage heat and 1-stage cool system.
Wiring diagram and dip switch settings for a 2-stage heat and 2-stage cool system.
Wiring diagram and dip switch settings for single stage heat pumps with auxiliary heat.
Wiring diagram and dip switch settings for dual stage heat pumps with auxiliary heat.
Wiring diagram for heat-only systems using the Venstar 2-Wire Kit ACC0436.
Overview of the steps required to connect the thermostat to a Wi-Fi network.
Explanation of the different Wi-Fi status icons displayed on the thermostat.
Instructions for using the mobile app to configure Wi-Fi settings on the thermostat.
Steps to create a Skyport account and link the thermostat for remote access.
Procedure to join an existing Skyport account with the thermostat using a verification code.
How to access and interpret Wi-Fi status information on the thermostat display.
Description of the thermostat's main display screen and its components.
Explanation of the UP/Warmer, Down/Cooler, Mode, and Fan buttons.
Meaning of the indicator light color for heating (Red) and cooling (Green).
Symbols indicating the thermostat's operational mode: Heat, Cool, Auto, Off.
Function of the clock and day of week display for scheduling and timekeeping.
Current room temperature and desired set temperature readings on the display.
Explanation of icons for Morning/Day/Evening/Night, Setup, Fan, and Locked status.
How to adjust heat and cool setpoints in Auto, Heat, or Cool modes.
Instructions for controlling continuous fan operation or auto fan mode.
Table of button presses required to enter various setup menus.
Procedure for navigating and modifying settings within the setup screens.
How to set the time and day, either via Skyport or manually.
Configuration options for backlight behavior and night dimmer schedule.
Setting up runtime hours and calendar days for filter change alerts.
Restricting maximum heat and minimum cool setpoints for user control.
Setting the maximum number of HVAC cycles allowed per hour.
Configuring the minimum off-time for the compressor to prevent short cycling.
Defining the minimum temperature gap between heat and cool setpoints in AUTO mode.
Adjusting deadband for 1st and 2nd stage heating/cooling and turnoff points.
Configuring fan off delay and temperature units (F/C).
Enabling and understanding the Comfort Recovery feature for proactive temperature adjustment.
Configuring dry contact polarity and its use for condensate pan, vacation, or fault detection.
Enabling Skyport, Local API, restricting modes, and controlling clock display.
Instructions for enabling and disabling the thermostat's keypad lockout function.
Procedure to enter Time Period Programming screens and select the day to program.
Setting up Morning, Day, Evening, and Night periods, including enabling/disabling.
Setting mode, start time, and setpoints for each programmed time period.
Detailed explanation of how 1st and 2nd stage deadbands control system operation.
How to initiate and exit the Emergency Heat feature on heat pump systems.
Steps to calibrate the thermostat's temperature sensor for accuracy.
Procedure to reset the thermostat and Wi-Fi settings to their original factory defaults.
To Next Page
