Venstar T2000 - Programming a Daily Schedule; Entering Schedule Programming; Configuring Time Periods

Programming a Daily Schedule
27
To enter Time Period Programming screens,
Press and hold MODE and UP until
the scrolling prompt appears.
Select Day of Week to program -
PresstheWARMERorCOOLERbuttonstochoosethedayofthe
week.PressMODEtoadvancetothenextstep.
Programming a Daily Schedule
This thermostat features four programmable time periods per
24 hour day: Morning, Day, Evening, and Night. The start time
for each time period is adjustable. The stop time for each time
period is the start time for the next period. Each time period, or
day part may be individually disabled.
Select the Day to Program - PresstheWARMERorCOOLER
buttonstoselectthedesiredDayoftheWeek.
Enable/Disable Morning Period - PresstheWARMERorCOOLER
buttonstoselectONorOFF.IfthedefaultONisselected,then
theMorningperiodwillruncompletewiththeModeandSet
Pointsselected.IfOFFisselectedthentheMorningdaypartwill
beskippedandthethermostatwillusethenextdaypartthatis
enabled.
MODE