Venstar T2000 - Emergency Heat Functionality

Emergency Heat
OnlyavailableifyouhaveaHeatPumpinstalled.Toinitiatethe
Emergency Heat feature, press the FANbutton.WhileholdingtheFAN
button press the UP button for two seconds.
Thedisplaywillread‘EMHEAT’
(EmergencyHeat).
DuringEmergencyHeatoperationthethermostatwillturnonthefan
andtheAuxstripheatwhenthereisademandforheat.Alsoduring
EmergencyHeat,heatpumpoperationwillbeunavailable.
Exit Emergency Heat
FollowthesamestepsasenteringEmergency HeatbypressingtheFAN
and UPbuttons,fortwoseconds.DuringEmergencyHeat,onlyOFFand
HEATmodesareavailablebypressingtheMODE button.
About Advanced Features & Operation
30
FAN
Press for
Emergency Heat