Venstar T2000 - Temperature Calibration Procedure

About Advanced Features & Operation
31
1 Place the thermostat in the OFF mode.
2 Press and hold the MODE button. While
holding the MODE button, press and hold
the DOWN button for 5 seconds.
All icons will appear on the display.
3 Press the MODE button once. The thermostat
temperature will be displayed and may be
calibrated using the UP or DOWN buttons. The
calibrated oset from the “raw” temperature
reading is displayed in the lower right corner.
Additionally, on this screen you may view the
Software Version in the upper left corner.
4 After calibration is complete, press the
MODE button once to save your changes
and return to normal operation.
MODE
MODE
MODE
MODE
Calibration
Undernormalcircumstancesitwillnotbenecessarytoadjust
the calibration of the temperature sensor. If calibration is
required,pleasecontactatrainedHVACtechniciantocorrectly
performthefollowingprocedure.