Venstar T2000 - Adding Thermostat to Skyport; Wi-Fi Status Screen Navigation

12
Connect to Wi-Fi Overview
Join a Thermostat to Skyport
IfthethermostatisconnectedtothelocalWi-Fiaccesspointbutnotyet
joinedtoanexistingSkyportaccount,youmayjointhethermostattothe
accountbydoingthefollowing:
1. LogintoyourSkyportaccount.
2. Selectthe“Location”youwanttoaddathermostatinto.
3. Selectthe“Thermostattab”.
4. Select“+Addthermostat”.Ascreenwill‘pop-up’askingfora
sixdigitcode.
5. PresstheFANbuttononthethermostatfor5seconds.
6. PresstheWarmerbuttononthethermostat.
7. Asixdigitcodewillappearonthethermostat’sdisplay.
8. EnterthesixdigitcodeintoyourSkyportaccount.
Wi-Fi Status Screens
Pressandholdthefanbuttononthethermostatfor5seconds.When
“Wi-FiSetup”appearsonthedisplay,presstheMODEbutton.Pressing
theupordownbuttonwillsequencethroughthefollowinginformation:
• APName
• APSignalStrength
• IPAddress
• SkyportStatus
• APIStatus