Venstar T2000 - Using the Venstar Configurator App; Connecting to Skyport Account

11
Connect to Wi-Fi Overview
ICON
Wi-Fi Setup
The Venstar Configurator App is needed to configure the Wi-Fi
Settings of this thermostat
• Download the Venstar Configurator App
fromyourmobiledevice’sAppStore.
• Open the Venstar Configurator App
 - ChoosetheExplorerMinithermostatbyslidingthe  
 thermostatpicturesatthetopoftheapps’display  
 totheleftuntilyouseeapictureoftheExplorerMini.
 - PressandholdtheFANbuttonofthethermostatfor
 approximately5secondstoenterWi-Fisetupscreens.
 - PressthecoolerbuttontosetupWi-Fi.
 - FollowtheinstructionsthatappearontheVenstar
 ConguratorApp.
Connect to Skyport
AlthoughthereismorethanonewaytocreateaSkyportaccount,the
steps below illustrate account creation from a browser. To create a
Skyportaccountathermostatmustbejoinedtotheaccount.
IfthethermostatisconnectedtothelocalWi-FiAccessPoint,butyou
donothaveaSkyportaccount,youmaycreateanaccountandjointhe
thermostattotheaccountbydoingthefollowing:
1.Openyourbrowserto:http://venstar.skyportcloud.com
2. Select“Createaccountnow”
3. Follow on screen instructions to create an account and add a
thermostattotheSkyportaccount.
Create Account Now