Venstar TSTATEZ - Display; Mode Indicators; Time and Temperature Displays; Setpoint and Sensor Indicators

STEP #2
REMOVE & REPLACE OLD THERMOSTAT
Remove the cover of the old thermostat.
If it does not come off easily check for
screws.
Loosen the screws holding the thermostat
base or subbase to the wall, and lift away.
Disconnect the wires from the old
thermostat. Tape the ends of the wires
as you disconnect them, and mark them
with the letter of the terminal for easy
reconnection to the new thermostat.
Keep the old thermostat for reference
purposes, until your new thermostat is
functioning properly.
Page 3
74
i2:00
72
Pm
WAKE
HEAT
74
i2:00
72
Pm
WAKE
HEAT
74
i2:00
72
Pm
WAKE
HEAT
74
i2:00
72
Pm
WAKE
HEAT