Ventrac 4100 - Seat Latch (DD); Seat Prop (EE); Suspension Seat

OPERATIONAL CONTROLS
Operation - 22
SEAT LATCH (DD)
A
A
B
B
The seat latch (A) secures the standard seat during
transport.
To release, pull the
latch away from the
seat plate while lifting
up on the seat.
SEAT PROP (EE)
The seat prop (B)
secures the seat in the
tipped forward position
while service is per-
formed under the seat.
To secure, tip the seat
forward, lift up the seat prop, and insert the end into
the wide portion of the seat plate slot. Move the seat
prop to the narrow portion of the slot to prevent ac-
cidental release.
To release, move the seat prop to the wide portion of
the slot. Tip the seat forward while guiding the seat
prop out of the slot. Lower the seat prop back into
the seat box.
SEAT LOCK LEVER (FF)
The seat lock lever is included with the optional
suspension seat kit. It secures the suspension seat
during transport. It can also replace the standard
seat latch.
Engage the seat lock lever by lifting up until it locks
in the upright position. Disengage the seat lock lever
by pushing it down alongside the seat.
Seat Lock
Seat Lock
Lever
Lever
(Disengaged)
(Disengaged)
Seat Lock
Seat Lock
Lever
Lever
(Engaged)
(Engaged)
The seat lock lever must be disengaged prior to
operation.