EasyManua.ls Logo

Ventrac 4100 - Electrical; Hydraulic; Power Unit

Ventrac 4100
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLESHOOTING
Troubleshooting - 42
SYMPTOM:POSSIBLE CAUSE:
Battery does not charge.
Loose or corroded connections.
Broken or loose wire in charge system.
Defective battery.
Defective alternator.
Defective voltage regulator.
Lights do not activate. Blown fuse.
Blown light bulb.
Broken wire/connection.
Faulty light switch.
PTO does not engage. Faulty seat switch. NOTE: Operator must be in seat.
Faulty PTO switch.
Faulty PTO relay switch.
PTO belt failure.
Clutch out of adjustment.
Faulty clutch.
Electrical problem.
ELECTRICAL
SYMPTOM:POSSIBLE CAUSE:
Front attachment fails to lift. Low hydraulic oil.
Excessive load on hitch.
Faulty hydraulic cylinder.
Low hydraulic charge pressure.
Bolt missing from hitch frame or lift cylinder.
Steering is dif cult. Low hydraulic oil.
Faulty hydraulic cylinder.
Cold temperature. Allow power unit to warm up.
Excessive noise in hydraulic system. Low hydraulic oil.
Cold temperature. Allow power unit to warm up.
SYMPTOM:POSSIBLE CAUSE:
Power unit will not move with engine running.
Selector lever is in the park position.
Brake does not release.
Low hydraulic oil.
Pump control linkage is loose.
High/low range shift lever is in neutral.
Suspension seat lock is engaged. (If equipped)
HYDRAULIC
POWER UNIT

Table of Contents

Related product manuals