Why does my Venue thinpar 64 breaker/fuse keep blowing?
The breaker or fuse might be blowing due to an excessive circuit load. Check the total load placed on the electrical circuit. Alternatively, there might be a short circuit along the power wires. Inspect the electrical wiring, both internal and external, for any shorts.
What to do if Venue thinpar 64 Flood Light does not power up?
If your device isn't powering up, first, check for power on the mains. Second, examine the power cord to ensure it is properly connected.
General| Brand | Venue |
|---|---|
| Model | thinpar 64 |
| Category | Flood Light |
| Language | English |
Lists all the components that should be present in the package with the fixture.
Provides guidance on how to carefully unpack the fixture and check for any shipping damage.
Explains the text formatting and symbols used throughout the manual for clarity.
Details the meaning of various icons used to highlight important information.
Covers essential safety guidelines for operating and installing the fixture to prevent hazards.
Highlights the primary operational capabilities and effects of the fixture.
Lists secondary features such as low profile design and rigging options.
Describes the layout and function of connections and controls on the rear of the fixture.
Information on connecting the fixture to the appropriate power source and voltage.
Instructions on how to connect multiple fixtures together for power distribution.
Guidance on securely mounting the fixture, adjusting its angle, and using safety cables.
Explains the function of each button located beneath the LED control display.
Details how to connect fixtures in a DMX or master/slave configuration using DMX cables.
Details AUTO, SOUND ACTIVE, DMX, COLOR, SPEED, and CUSTOM color modes.
Describes how to use preprogrammed chase sequences and adjust their speed.
Explains how to use preprogrammed sound-triggered chases and adjust sensitivity.
Details how to select from a range of preprogrammed static color presets.
Guides users on creating and saving custom static color combinations.
Explains how to set the initial DMX channel address for fixtures to avoid overlaps.
Details how to set up master/slave configurations for synchronized fixture control.
Provides basic information about DMX connections, channels, and addressing.
Lists common symptoms, possible causes, and recommended actions for resolving issues.
Details the technical characteristics required for DMX cables to ensure reliable data transmission.
Explains XLR connectors and the importance and use of signal terminators.
Provides a chart for converting between 3-pin and 5-pin DMX connectors for compatibility.
Offers guidance on cleaning and maintaining the fixture for optimal performance and longevity.
Lists the physical size and weight of the fixture.
Details power requirements, consumption, output, and fuse rating.
Information on the LEDs, Lux output, and beam/field angles.
States the maximum ambient temperature for safe and effective operation.
Outlines the terms and conditions of the limited warranty for the product.
To Next Page