Venue thinpar 64 - Safety Instructions; General Safety Precautions

THINPAR 64 USERS MANUAL
4
2. SAFETY INSTRUCTIONS
Pleasereadtheseinstructionscarefully.Itincludesimportantinformation
about the installation, usage and maintenance of this product.
• PleasekeepthisUserManualforfuturereference.
• Makesurethatyouareconnectingtothepropervoltage,andthatthelinevoltageyouareconnectingto
is not higher than that stated on the decal or rear panel of the fixture.
• Thisproductisintendedforindooruseonly!Topreventriskofreorshock,donotexposexturetorain
or moisture.
• Makesuretherearenoammablematerialsclosetotheunitwhileoperating.
• Theunitmustbeinstalledinalocationwithadequateventilation,atleast20”(50cm)fromadjacent
surfaces. Be sure that no ventilation slots are blocked.
• Alwaysdisconnectfromthepowersourcebeforeservicingorreplacingthefuseandbesuretoreplace
withsametypefuse.
• Securexturetofasteningdeviceusingasafetychain.
• Maximumambienttemperatureis104°F(40°C).Donotoperatethextureattemperatureshigher
than this.
• Intheeventofaseriousoperatingproblem,stopusingtheunitimmediately.Nevertrytorepairthe
 unityourself.
• Neverconnectthedevicetoadimmerpack.
• Makesurethepowercordisnevercrimpedordamaged.
• Neverdisconnectthepowercordbypullingortuggingonthecord.
• Nevercarrythexturedirectlyfromthecord.Alwaysusethehanging/mountingbracket.
• Avoiddirecteyeexposuretothelightsourcewhileitison.