Can my device remember my POS on startup?
When you enabled Bluetooth connection on your e285, you selected one of the following possible
connection modes:
● On startup, your e285 automatically searches for available POS devices.
● On startup, your e285 remembers the last POS device it was connected to and
automatically reconnects to it.
If you want to change your device’s connection mode, contact our Support Team.
How do I configure a static IP address?
Wi-Fi
1. Use the keypad to press 1, 5, and 9 at the same time.
2. Tap Com Control.
3. Tap WiFi.
4. Tap Configuration, and then use the keypad to enter the password. The default password is
200331.
5. Tap OK.
6. From the list of networks, select the network you want to configure, and then tap View/Edit.
7. Tap IP settings, and then tap IPv4.
8. Tap DHCP, and then tap No.
9. Tap IP Address, and then set values for the following fields:
a. IP address
b. Subnet mask
c. Gateway IP address
d. DNS 1
e. (Optional) DNS 2
Note: If you do not have 12 digits in your IP address, use zeros to complete your IP address. For
example, to use the IP address 192.168.2.35, enter 192.168.002.035.
Apply your settings and return to the home screen
1. Tap twice.
2. Tap Save, and then tap OK.
8 | Wireless e285 Quick Start Guide
To Next Page
Loading...
