Ruby2 Hardware Installation Guide
October 01, 2013 7
Choosing a Location
The Ruby2 workstation is generally placed on an easily accessible
countertop. Consider the following when deciding on a location.
■ Allow adequate ventilation around the unit.
■ All cables must easily reach their connecting devices.
■ Consider the height requirements to determine the pole height for
the customer display.
■ Make sure that there is sufficient clearance for both the drawer
and the cashier.
■ Make sure that power cords are not in the direct path of foot
traffic.
In addition, the location must meet the following requirements:
■ Power: 100-240V~, 50/60 Hz 3.0 Amps
■ Temperature:
– Operating: 32 to 104° F (0 to 40° C)
– Non-operating: -4 to 140° F (-20 to 60° C)
■ Humidity: 15% to 95% relative humidity at 40° C (non-condensing)
Avoid locations with the following characteristics:
Warning:To reduce the risk of fire, do not place the Ruby2 near objects
that produce excessive heat.
■ Direct sunlight
■ Moisture
■ Excessive dust
■ Electrical “noise” or devices that cause excessive voltage variations
such as air conditioners, fans, or high frequency security systems
To Next Page
Loading...
Need help?
General
