VeriFone T650p - Device Features

DEVICE SETUP
Device Features
T650
P INSTALLATION GUIDE 15
• Paper roll
4 Remove all plastic wrapping from the device and components.
5 Remove the clear protective film from the display.
6 Inspect the terminal for possible tampering. See how to identify signs of
tampering in section Periodic Inspection.
7 Save the shipping carton and packing material for future repacking or moving
of the device.
Periodic Inspection Periodically inspect the terminal for possible
tampering. Signs of tampering
include:
• Overlays in the PIN pad area
• Wires protruding out of the device
• Foreign objects inserted into the smart card slot or magnetic stripe slot
• Any bumps in the casing below the mag stripe slot and any noticeable
additional mag stripe head from the side
• Signs of damage to the tamper-evident labels
• A Tamper Warning message on the device display
If any device is found to have been tampered with, please remove it from ser
vice
immediately, keep it available for potential forensics investigation, and notify your
company security officer and your local Verifone representative or service
provider. To contact Verifone, please see Service and Support.
Device Features
Familiarize yourself with the features before continuing with the installation
process:
NOTE
Verifone ships variants of the T650p for different markets. Your unit may have
different options or accessories described in this section.
WARNING
Do not use a tampered or damaged unit. The device comes equipped with
tamper-evident labels. If a label or component appears damaged, please notify
the shipping company and your Verifone service provider immediately.