UX401 INSTALLATION GUIDE 15
CHAPTER 3
Specifications
This chapter discusses power requirements, dimensions and other specifications
of the contactless reader.
Power Consumption
• Power consumption mode: 450 mW, maximum
• Card read mode
• Idle mode
• Sleep mode: 0.3 W
Temperature
• Operating temperature: -20 °C – 70 °C (-4 °F – 158 °F)
• Storage temperature: -25 °C – 70 °C (-13 °F – 158 °F)
• Relative humidity: 5% to 90% RH non-condensing
External
Dimensions
• Length: 96 mm (3.78 in)
• Width: 99 mm (3.9 in)
• Depth: 46 mm (1.81 in)
Weight
• Unit weight: 142 g (5 oz)
CTLS Card Reader
• 4 LEDs for CTLS indications
Peripheral Ports
• RJ45 host communication port
• SMA (RF) antenna
Communication
• I
2
C.
If this device is to be used in the Nordic countries, or in any environment where
the temperature range exceeds the product’s operating temperature, it is the
responsibility of the integrators to ensure that the ambient environment is
controlled in such a way to ensure that the product operates within the specified
temperature range.
To Next Page
Loading...
Need help?
General
