PaymentCloud LLC. • 800-988-2215 • support@paymentcloudinc.com
Table of Contents
Additional Information
3V.032025
Verifone V200C
User Manual & Setup Guide
Spec Sheet
Shop Verifone V200C
Power ON:
Power OFF:
How to Load Paper Roll
1. Use the latch on the top of your Verifone V200c to open the
printer paper compartment.
2. Load a roll of 2.25“ thermal receipt paper into the printer paper
compartment, with a small length of paper extending outward.
3. Close the latch.
How to Turn On/Off
1. Access the power hub on the rear of the terminal.
2. Plug the power cord into the power port.
3. Ensure that your power cord is plugged into a reliable host
power source.
4. Connect the V200c’s Ethernet cable to the Ethernet port (i.e.,
the middle port) inside the power hub.
5. Your terminal should turn on shortly after.
1. Disconnect your Verifone V200c from your host power source.
Verifone V200c - Default Password
The default admin password for the Verifone V200c is either 1234
or 123456. The supervisor password required for merchants to
enter SYSTEM MODE is 166831.
How to Enter System Mode
1. Press the 1, 5, and 9 keys at the same time.
2. When prompted, enter the default supervisor password
(166831). You are now in SYSTEM MODE.
Setup
Setup
3
Accept Payments
5
Rights Reserved
11
Settings
8
Troubleshooting
& Tips
9
Overview
2
To Next Page
Loading...
