VeriFone Vx510 - Purchasing with a Smart Card

POS terminal Vx510 Instructions for use
10
6. Purchase with smart card
1. Data Menu
Time
READY FOR TRANSACTION
Pull card
F1
F2
F3
F4
Insert card into chip card reader of the terminal (see
device (Picture 5.) with chip upwards. Card proccessing is
going on.
2. Purchase
Enter amount
LVL 1.00
F1
F2
F3
F4
Transaction amount must be entered, then pressed [

] key.
4.
LVL 1.00
Processing going on
F1
F2
F3
F4
After entering of transaction amount, merchant must give
the terminal to client, for entering client’s PIN.
5.
ENTER PIN
F1
F2
F3
F4
Client enters into terminal his/her code and press green
confirmation button. If the client makes a mistake during
entering PIN, it is possible to clear incorrectly entered
numbers by pressing yellow button, or break the operation
by pressing red button.
6. Please wait....
Calling...
Transaction confirmed.
F1
F2
F3
F4
After entering PIN and its confirmation, terminal will start
to process transaction and different messages will be
displayed on the terminal screen. As a result of successful
transaction two copies of reciept will be printed. As a
result of unsuccessful operation will be printed one copy
of reciept with explanation of rejection.