■ Click User Configured.
■ For the IP address, enter 192.168.229.nnn, where nnn is any number
from 2 through 254 except for 233.
■ For the Subnet mask, enter 255.255.255.0.
■ Click OK.
2
On the laptop that is connected to the appliance, open an SSH session to
192.168.229.233 and log on to your appliance.
The logon is admin and the default password is P@ssw0rd.
After you log on, the welcome message appears in the shell menu and the
prompt is at the Main_Menu view.
3
Before performing the reconfiguration process, make sure you have followed
the re-image procedure.
51Initial configuration procedures
Performing the initial configuration on a 52xx master server appliance from the NetBackup Appliance Shell
Menu
To Next Page
Loading...
Need help?
General
