VERITAS NetBackup 5240 Guide

Table 1-2
Unsupported data transfer methods for NetBackup
appliances (continued)
OperationTargetSourceMethod
Client-side deduplication52xx/53xxSAN ClientFC
Auto Image Replication52xx/53xx5020/5030TCP/IP
See “About Fibre Channel supported features on NetBackup Appliance” on page 6.
See “About the NetBackup 5230 rear panel configurations” on page 18.
See “NetBackup 5330 Appliance compute node PCIe slot I/O configuration options”
on page 23.
See “NetBackup 5240 Appliance I/O configuration options” on page 20.
About Fibre Channel feature support with appliance HBA
configurations
Fibre Channel (FC) feature support depends on the particular HBA configuration
of each appliance. This section describes what FC features are supported with
different appliance HBA configurations.
To check whether a particular FC feature is supported on your appliance, refer to
the following tables.
■ See Table 1-3 on page 15.
■ See Table 1-4 on page 15.
■ See Table 1-5 on page 16.
■ See Table 1-6 on page 17.
If you do not know what HBA configuration you have on the appliance model, refer
to the following topics for the appliance rear panel configuration:
See “About the NetBackup 5230 rear panel configurations” on page 18.
See “NetBackup 5240 Appliance I/O configuration options” on page 20.
See “NetBackup 5330 Appliance compute node PCIe slot I/O configuration options”
on page 23.
You can also refer to the NetBackup Appliance Product Description Guide for your
appliance model at the NetBackup Appliance Documentation page.
14Introducing Fibre Channel support on NetBackup Appliance
Supported data transfer methods for NetBackup appliances

VERITAS NetBackup 5240 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	5 year(s)