See “Notes on NetBackup appliance as a VMware backup host” on page 81.
For complete details about NetBackup for VMware and how to configure VMware
policies, see the NetBackup for VMware Administrator's Guide.
Tape out
NetBackup appliance supports backups to tape so that you can connect one or
more tape libraries to them with FC. An FC host bus adapter (HBA) provides for
connection to a TLD tape storage device.
For information about how to configure a NetBackup 52xx or 53xx for backups to
tape, refer to the following topic:
See “About backup to tape support for NetBackup appliances” on page 78.
See “Supported Fibre Channel port configurations for the NetBackup 5220 and
5230 appliances” on page 37.
See “Supported Fibre Channel port configurations for the NetBackup 53xx
appliances” on page 47.
See “Supported Fibre Channel port configuration for the NetBackup 5240 appliances”
on page 43.
About NetBackup Fibre Transport
NetBackup Fibre Transport is a method of data transfer. It uses Fibre Channel and
a subset of the SCSI command protocol for data movement over a SAN rather than
TCP/IP over a LAN. It provides a high-performance transport mechanism for the
following scenarios:
■ Backup and restore between NetBackup clients and NetBackup media servers
■ Optimized duplication and Auto Image Replication between NetBackup media
servers
See “About NetBackup SAN Client and Fibre Transport” on page 9.
See “About Fibre Transport for optimized duplication and Auto Image Replication
between appliances” on page 11.
About NetBackup SAN Client and Fibre Transport
SAN Client is a NetBackup optional feature that provides high-speed backups and
restores of NetBackup clients.
9Introducing Fibre Channel support on NetBackup Appliance
About NetBackup Fibre Transport
To Next Page
Loading...
Need help?
General
