Lifting heavy objects
Only trained and qualified personnel are allowed to lift heavy objects. The following
precautions must be taken when you lift heavy objects:
■ Do not stand or come in the way or walk under when heavy objects are lifted.
■ Check whether the required tools are complete and intact.
■ Ensure that the lifting tools are firmly fixed on a wall or have enough load-bearing
capacity.
■ If a rope is used, ensure that the angle between two sides of the rope is no
larger than 90°.
■ Use simple and clear commands while speaking to personnel. Avoid any
confusion that can cause accidents and damage to personnel or materials.
Binding signal cables
Signal cables must be separately bundled from the strong-current cables and
high-voltage cables at a spacing of at least 30 mm.
Detailed safety guidelines
Lifting heavy objects
18
To Next Page
Loading...
Need help?
General
