30
14 Fault Finding
Vernacare Vortex Fault Finding
In the event of a fault developing on the machine, causing ineffective operation or inability
to operate, the appropriate works department or our service engineering department
Vernacare Technical Services
, should be notified to attend the machine.
Index of Faults Page
Fault 1
Machine will not start 30/31
Fault 2
Motor does not function 32
Fault 3
Water pump does not function 32
Fault 4
Unable to close the lid 33
Fault 5
Unable to open the lid 33
Fault 6
Water leaking internally 34
Fault 7
Lid seal leaking/ bubbling 34
Fault 8
Hopper does not empty 35
Fault 9
Product stock has large particle size 35
Fault 10
Machine is not clean after use internally 35
Fault 11
Deodoriser is not working 37
Fault 12
Display screen not working 37
Appendix A
Manual Pump and Outlet pushbutton 37
Appendix B
Motor Terminal Wiring 38
Appendix C
Motor Electrical box plug and socket connections 39
Appendix D
Orientation of Diodes for drain inlet and drain outlet 39
solenoid valve coil terminals
WARNING:
Under NO circumstances
should the machine be dismantled or worked upon
without first fully isolating the machine from the electrical supply.
To Next Page
Loading...
