VERSATEK VX-MD4024 - Page 30

1 — Installation of the VX-MD4024
22 / 44
(F) Clear active DB excluding inband / (G) Clear active DB excluding inband and restart:
enable
configure
runningcfg clear general [noreboot]
/*You must add the word “noreboot” for action (F) so that the system will not reboot automatically
once the DB is cleared*/
(H) Export in CLI command format:
enable
configure
runningcfg put <FTP server ip address> <username> <password> cli <filename>
(I) Export in binary mode:
enable
configure
runningcfg put <FTP server ip address> <username> <password> binary <filename>
(J) Import CLI command / (K) Import CLI command and restart:
enable
configure
runningcfg get <FTP server ip address> <username> <password> cli <filename>
runningcfg import download cli [noreboot]
/*You must add the word “noreboot” for action (J) so that the system will not reboot automatically
once the DB is imported*/
(L) Import binary DB / (M) Import binary DB and restart:
enable
configure
runningcfg get <FTP server ip address> <username> <password> binary <filename>
runningcfg import download binary [noreboot]
/*You must add the word “noreboot” for action (L) so that the system will not reboot automatically
once the DB is imported*/
In Web:
Please refer to VX-MD4024 Web Configuration Tool Guide.