VERSATEK VX-MD4024 - Resolving Problems Indicated through Alarms; Procedures for Troubleshooting the VX-MD4024; Table 3-2 List of Troubleshooting Procedures

3 — Troubleshooting the VX-MD4024
34 / 44
3.3 Resolving Problems Indicated Through Alarms
Alarms of the system are viewed through CLI commands, Web GUI or EMS.
If an alarm indicates a problem, refer to section 3.4 for troubleshooting procedures.
3.4 Procedures for Troubleshooting the VX-MD4024
When you follow a troubleshooting procedure, start from the first step of the procedure. If the first
step does not solve the problem, proceed to the next step; keep going through the steps until the
problem is solved. Use the following table to find out the appropriate procedure for
troubleshooting the listed problems.
Table 3-2 List of Troubleshooting Procedures
Type of problem
Procedure
Number
VX-MD4024 power up problems
3-1
Fiber optics problems
3-2
VDSL/ADSLx service problems (POTS service is ok)
3-3
POTS service problems (VDSL/ADSLx service is ok)
3-4
Subscriber service problems (no POTS and VDSL/ADSLx
service)
3-5