Vertex Standard EVX-539 - User Set Mode

EVX-539 OpErating Manual 29
usEr sEt modE
The
EVX-539
includes a “User Set” (Menu) Mode which allows the user to dene or congure various settings,
such as Squelch, Display contrast, etc. To activate the “User Set” (Menu) Mode:

Press the assigned
PF
key assigned to the “
SET
”
function.

Select the User Set Mode item you wish to
change using the
[
A
]
/
[
B
]
keys, then use the
SIDE-1
/
SIDE-2
keys to adjust the setting of the
selected item.
sEt modE ItEm dEscrIptIon avaIlaBlE valuEs
SQL Sets the Squelch level.
SQL OP
(
Open
)
,
SQL TH
(
Threshold
)
,
SQL NM
(
Normal
)
,
SQL TI
(
Tight
)
Beep Enables/Disables the Key Beeper.
BEEP ON, BEEP OFF
Bell Enables/Disables the Bell function (Alert tone activated by incoming signaling).
BELL ON, BELL OFF
Light Enables/Disables the back light of the display and keypad.
LIGHT ON, LIGHT OFF
Key Enables/Disables the Key Lock function.
KEY FRE
(
Free
)
, KEY LCK
(
Lock
)
PTT Enables/Disables the PTT Lock function.
PTT FRE
(
Free
)
, PTT LCK
(
Lock
)
DIMMER Sets the LCD Brightness level.
DIMM 1, DIMM 2, DIMM 3
Scan Engages/Disengages Scanning.
SCAN ON,
SCAN FM
(
Follow-Me Scan
)
,
SCAN GRP
(
Group Scan
),
SCAN OFF
DW Engages/Disengages Dual Watch.
DW ON, DW OFF
AF Sets the minimum Audio Volume level.
AF 000 ~ AF 255
CONTRAST Sets the LCD Contrast level.
CONTR 00 ~ 15
TX Save Enables/Disables the TX Save function.
TXSV ON, TXSV OFF

Press the
[
D
]
key to store the new conguration.
You may cancel the selection by pressing the
[
C
]
key.

Press the programmable key assigned to the
“
SET
” function to exit to normal operation.
FCC ID: AXI11154620
IC: 10239A-11154620