EVX-S24 OPERATING MANUAL 1
Important Notice for North American Users Regarding 406 MHz Guard Band
The U.S. Coast Guard and National Oceanographic and Atmospheric Administration have requested the cooperation
of the U.S. Federal Communications Commission in preserving the integrity of the protected frequency range 406.0
to 406.1 MHz, which is reserved for use by distress beacons. Do not attempt to program this apparatus, under any
circumstances, for operation in the frequency range 406.0 - 406.1 MHz if the apparatus is to be used in or near North
America.
Warning - Frequency band 406 - 406.1 MHz is reserved for use ONLY as a distress beacon by the US Coast Guard
and NOAA. Under no circumstance should this frequency band be part of the pre programmed operating frequencies
of this radio.
INTRODUCTION
The
EVX-S24
is full-featured, compact Portable Digital/Analog Transceiver designed for business communications in the
UHF Land Mobile band. The
EVX-S24
supports up to 256 user confi gurable channels within a maximum 16 groups, sup-
porting a wide variety of business applications.
Channel frequency data for the transceiver is stored in fl ash memory, which is easily programmed by Vertex Standard li-
censed dealers using a standard PC and the following Vertex Standard programming equipment:
CE157
PC Programming Software
CB000262A01
Micro USB Programming Cable
This manual will describe in detail the many advanced features of the
EVX-S24
. After reading this manual, you may wish
to consult with your Network Administrator regarding precise details of the confi guration of this equipment for use in your
application.
To Next Page
Loading...
Need help?
General
