Vertex Standard EVX-S24 User Manual

10 EVX-S24 OPERATING MANUAL
Belt Clip Installation
Align the tab in the upper side of the Belt Clip to the slot
on the transceiver, and then secure the Belt Clip by tight-
ening the belt clip screw to the radio chassis with a Phil-
lips head screwdriver.
BEFORE YOU BEGIN
Antenna Installation
Hold the bottom end of the antenna, then screw it onto the
mating connector on the transceiver until snug. Do not
over-tighten with extreme force.
Never transmit without hav-
ing an antenna connected.

Vertex Standard EVX-S24 Specifications

General

Brand	Vertex Standard
Model	EVX-S24
Category	Two-Way Radio
Language	English