Vertex Standard VM-3500E - CHANGING THE TIME LOCATION

VM-3500EPage 12
6.7 CHANGING THE TIME LOCATION
You may select the time display between local time and UTC (time GPS sends
to radio). Time is displayed when GPS position (LAT/LON) is displayed by press-
ing the
[
F
]
key followed by the
[
6
(
NAV
)]
key.
1. Press and hold down the [CALL(MENU)] key until
“Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “Time Disp” in the
“Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select “UTC” or
“Local.”
5. Press the
[
ENT
]
key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.
In the local time mode, the display shows the time by the 12-hour system.
Meanwhile, the display shows the time by the 24-hour system in the UTC mode.
(
“UTC” mode
)(
“LOCAL” mode
)