VX-150 OPERATING MANUAL 25
Memory-Memory mode
Store a frequency that you want to use as the Dual Watch “Priority” channel into memory
“1.”
Set the radio to the Memory mode by pressing the
[
MR
(
SKIP
)]
key.
Rotate the DIAL to select the channel on which you wish to operate while periodically
checking for activity on channel “1” during Dual Watch operation.
Press the
[
F
]
key momentarily (not for 1/2 second), then press the
[
VFO
(
PRI
)]
key
(momentarily). A small “PRI” notation will appear on the LCD.
VFO-VFO mode
Press the
[
VFO
(
PRI
)
]
key to switch to the VFO mode, if needed.
Press the
[
F
]
key, then press and hold in the
[
VFO
(
PRI
)
]
key.
The VX-150 will now periodically change from the VFO-A frequency to the VFO-B fre-
quency, checking for activity on VFO-B for 0.2 second.
Scanning
To Next Page